>  >  > Dispensers

FTA-2i Aspirator with Trap Flask

Aspirator with trap flask FTA-2i is designed for aspiration or removal of alcohol, buffer and liquid from reaction vessels (e. g. during DNA / RNA purification or other macromolecule reprecipitation techniques).

The operation principle of the aspirator is based on creating negative pressure in trapping flask using built-in microcompressor. The collecting tip is connected with PE tube to the trapping flask. Liquid is removed from the reaction vessel when the collecting tip is in contact with the solution. A tube holder-organiser is conveniently located at FTA-2i right hand side; it accommodates two 1.5 / 2 ml tube slots necessary for collecting tip washing and storing, so that a tip can be re-used. The FTA-2i is equipped with a level sensor that detects excess liquid with consequential prevention of the overflow by automatically switching off the pump with a sounding alarm indication. The device is supplied, as standard, with vacuum regulation control knob that allows to smoothly select a preferable aspiration speed.
Technical Data:
Aspiration speed:up to 10 l / min (air)
Vacuum:- 200 to - 800 mbar (adjustable)
Volume of the trap flask:2 l
Sensor type of the liquid level:invasive
Overflow protection:motor stops, light and sound signal
Dimensions with trap flask (W x D x H):185 x 290 x 390 mm
Weight with trap flask:1.85 kg
Mains supply:input AC 100 to 240V 50 / 60 Hz; output DC 12 V
 DescriptionBottlePUOrder No.Manuf. Prod. No.
 FTA-2i aspirator with trap flask2 l, autoclavable154464489730786
 HAS-1 hand operator set-154464499730787
 MA-8 aspiration tip with holder, 8-channel-154464509730797
Replacement parts available on request.