>  >  > Dispensers

BIOSAN
FTA-1 Aspirators with Trap Flask

The operation principle of the aspirator is based on creating negative pressure in trapping flask using built-in microcompressor. The collecting tip is connected with PE tube to the trapping flask. Liquid is removed from the microtest tube when the collecting tip touches the solution surface. A tube holder-organiser is conveniently located at FTA-1 right hand side; it accommodates 2 tubes (e. g. for hydrochloric acid solution and distillate) necessary for collecting tip washing and storing.

Microbiological suction filter type 2200/02:
The microbiologic suction filter eliminates the risk of contamination with bacteria, viruses and infected particle from patient to suction pump or central vacuum distribution. The microbiological suction filter is hydrophobic and has very high bacterial efficiencies up to 99.99999 % particles bigger than 0.027 µm (which is smaller than Hepatitis A, B and C).

Exchange:
The filter must be replaced when as it's dirty or liquid was sucked in. The using time is max. 30 days. We recommend the immediate replacement of the filter after suctioning carriers of infection. It prevents the spread of infection. It prevents spread of infection.
Technical Data:
Vacuum:- 500 mbar
Volume of the trap flask:1 l
Dimensions with trap flask (W x D x H):160 x 210 x 340 mm
Weight with trap flask:1.7 kg
Mains supply:input AC 100 to 240 V, 50 / 60 Hz; output DC 12 V
 DescriptionBottlePUOrder No.Manuf. Prod. No.
 FTA-1 aspirator with trap flask1 l160085689730747